Rugged construction and modular adaptability are the foundation of our FAST platform, helping you conquer the routine, the unexpected and everything in between. Combining the best of military design and mountaineering ergonomics, FAST Packs are built to be your trusted companion for adventures close to home or missions far away.
Strategically engineered for premium comfort, utility, and modularity, our nimble 1350 cubic inch FAST Pack Litespeed is a new generation of everyday carry. The Litespeed is built for minimalist daily carry but has been carefully engineered to adjust to end-user requirements and adapt to multiple mission profiles. Step into the new evolution of carry and harness the speed of light.
Strategically placed Pouch Attachment Ladder System (PALS) webbing is compatible with Modular Lightweight Load-Carrying Equipment (MOLLE) accessories so that you can customize the layout of your gear to suit your changing needs. Two-inch webbing underneath portions of the PALS webbing lets you attach wider items, such as Tek-Lok™ equipped sheaths and holsters. Our signature Transport Tail can be used to hold odd-sized items like a helmet, or released into the down position to hold linear items like rifles.
Made with a unique high pressure nitrogen gas solution process, aerated closed cell foam padding aids in superior shock protection and comfort. Polyester and nylon mesh aid in ventilation on the shoulder straps and back panel of the pack. The mesh also creates a softer surface to decrease wear and tear on your apparel. Engineered suspension geometry and a HDPE framesheet enable the pack to ride higher on your back. Load lifters allow the load to be pulled into the body for maximum comfort.
Anchor points on the exterior and interior of the pack enable you to continually adapt and evolve the pack configuration to your changing needs. Use our Control Panel 1 to create mission-specific loadouts and interchange them easily, or attach our FAST Transporter Tail internally to secure heavy items such as water bladders or ammunition against the frame for support.
A lightweight attachment system along the handle provides an easy way to attach bulky items such as a rope or jacket to the top of your pack for easy access. Incorporating 8 feet of removable paracord, it's also usable for other purposes in an emergency.
Removable compression straps at the base secure odd-sized items.
Made of MIL-SPEC Invista™ Cordura® fabric, a high tensile strength composite nylon thread and webbing that’s nearly impossible to rip or tear. Hypalon, the same material found on Zodiac boats, was used to reinforce critical stress points on the pack, such as the handle, shoulder strap connection points, and top exit port for the hydration tube.
Shown in Black
A versatile 3-D admin compartment helps organize smaller EDC items such as pens, lights, passports, knives, or cables. This keeps your items separated and easily accessible when you need them.
The admin drop pocket is sized to carry larger EDC items such as sunglass cases, laptop charging cables, or separate organizer pouches.
The top of the main compartment contains a hydration bladder hanger to adjust the height of the bladder. The hydration bladder hose can be routed through the top hydration hose port.
The main compartment also contains two top anchor points, making the pack compatible with any Control Panel or Transport Sleeve.
The main compartment interior perimeter contains anchor points for additional mounting option of Control Panels or Transport Sleeves or Transporter Tails as well as other third party accessories.
The main compartment also contains anchor points at the bottom of the pack for additional mounting options.
The front of the main compartment contains two zippered compartments, gusseted to hold additional carry items such as gloves, headwear, or cables.
The internal compartment dimensions are 12"W x 20"H x 6.75"D without stuffing. This makes the FAST Pack Litespeed compatible to carry any modern laptop or tablet with left over storage capacity for additional items. The FAST Pack Litespeed can be stuffed to accommodate slightly more internal dimensions if needed.
The included Transporter Tail can be used on the external as well as the internal of the pack to allow for additional storage or security options.
Strategically placed Pouch Attachment Ladder System (PALS) webbing is compatible with Modular Lightweight Load-Carrying Equipment (MOLLE) accessories so that you can customize the layout of your gear to suit your changing needs.
Two-inch webbing underneath portions of the PALS webbing lets you attach wider items, such as Tek-Lok™ equipped sheaths and holsters.
Our signature Transport Tail can be used to hold odd-sized items like a helmet, or released into the down position to hold linear items like rifles.
The included compression straps can be easily removed or used to strap loose gear to the pack, or used to attach the included Transporter Tail.
The 3" x 9" external velcro strip allows for moral pouches or name tapes to customize and easily ID your pack.
Bottom compression allows for the attachment of additional gear or to reduce the footprint of the pack.
A low profile Hypalon Synthetic Rubber Reinforced carry handle lays flats to avoid snagging when not in use.
YKK Aqua-Guard zippers protect valuable internals against heavy down pours and spills.
Black variation features VX-42RS, a 210 denier nylon ripstop laminated to an X-Pac™ scrim, while the Multicam Black variations features X50, a 500 denier CORDURA® nylon laminated to an X-Pac™ scrim.
Made of MIL-SPEC Invista™ Cordura® fabric, a high tensile strength composite nylon thread and webbing that’s nearly impossible to rip or tear.
The side perimeter of the pack contains strategically placed Pouch Attachment Ladder System (PALS) webbing is compatible with Modular Lightweight Load-Carrying Equipment (MOLLE) accessories.
A lightweight attachment system along the handle provides an easy way to attach bulky items such as a rope or jacket to the top of your pack for easy access. Incorporating 8 feet of removable paracord, it's also usable for other purposes in an emergency.
Polyester and nylon mesh aid in ventilation on the shoulder straps and back panel of the pack. The mesh also creates a softer surface to decrease wear and tear on your apparel.
The shoulder straps include webbing attachment points for additional MOLLE compatible gear, D-rings for leashing keys, flashlight, or GPS, and elastic keepers for hydration hose management.
Raised panels of Evazote® Closed Cell Cross-Linked Ethylene Copolymer Foam contained within DRI-LEX® Aerospacer Moisture Management Mesh helps create a channel on the center back to allow for increased airflow to minimize sweating and heat buildup withe pack against your back.
Engineered suspension geometry and a HDPE framesheet enable the pack to ride higher on your back. Load lifters allow the load to be pulled into the body for maximum comfort.
Left - FAST Pack Scout
Center - FAST Pack Litespeed
Right - FAST Pack EDC